ITC T-1S120, Operation Manual

Page: 11 / 17

GND
LIFT
INPUTS LINK
COM 4-16 70V 100V
OUTPUTS
COM COM INPUTS LINK
1 1 2 2
3 3
XLR BAL
1-GND
2-HOT+
3-COLD-
6.5 SPEAKER OUTPUTS 4~16 & 70V& 100V
4-16 ,SPEAK 70V,SPEAK 100V,SPEAK
+
-
+
-
+
-
USE ONLY WITHA 250VFUSE
OUTPUTS
COM 4-16 70V 100V COM COM
GND
LIFT
C
USE ONLY WITHA 250VFUSE
OUTPUTS
COM 4-16 70V 100V COM COM
GND
LIFT
C
USE ONLY WITHA 250VFUSE
OUTPUTS
COM 4-16 70V 100V COM COM
GND
LIFT
C
High impedance and low impedance both speaker output for different application use. Only choose one of the
positive end from 4~16 & 70V& 100V, then connect the negative end"COM" and one the positive end to the
speaker's according ends. High impedance speaker output only for high impedance speaker connection and
low impedance speaker output only for low impedance speaker connection. Speaker total power output shall
be no higher than 80% percent of the amplifier rated power output.
Notice:
No mixing connected the positive and negative ends between the amplifier and loudspeaker.
Never allowed to use more than one output among 4~16
/70V/100V.
Speaker continuous power output never higher than 80% of the amplifier rated power output.
Never connect high impedance output to low impedance speaker nor connect low impedance output to
high impedance speaker.
Please cover the speaker output ends after wiring to avoid any touch. The speaker output are high
voltage, never touch by human body to avoid electricity shock.
11
Picture 1.5
OPERATION GUIDANCE