background image

9

5. OPERATION ILLUSTRATION

Note:

1

.

Turn

 

off

 

the

 

power

 

switch,Please

 

wait

 

about

 

5

 

seconds

 

before

 

turning

 

on

 

again.Continuous

 

rapid

turning

 

on

 

and

 

off

 

the

 

power

 

switch

,

it

 

will

 

lead

 

to

 

equipment

 

failure

.

2

.

Even

 

the

 

switch

 

is

 

in

 

the

 

off

 

status

there

 

will

 

be

 

a

 

little

 

current

 

in

 

equipment

If

 

it

 

won’t

 

use

 

the

equipment

 

in

 

a

 

long

 

time

please

 

unplug

 

the

 

power

 

cord

 

from

 

the

 

wall

 

AC

 

socket

.

4.Microphone using:

1.Turning the volume knob to the left,Connect the microphone and microphone input interface.
2.Turning the volume knob in the right position.
3.Facing the microphone and Speak loudly, turn the volume knob to the right, until the output signal

no longer distortion.If input is high but output is low voice, and then increase the volume by using

the volume knob.If the speaker volume is very high, then reduce the volume by using the volume
knob.

5.Shutdown the system:

1

.

Turning the volume knob to the left until the minimum position.

2

.

Turning off the panel power switch of the professional power amplifier, at 0ff.In turn shutoff

processor equipment and audio source equipment.

6.Built-in

 

MP3

 

player

 

operation

 

method:

The buttons are explained as follows:

S.No Buttons

Function

/

Mode function button; FM / USB / BT / playing (Long press this button to 

forcibly turn on / off the machine)

1

/

6

/

2

Previous song (long press to increase volume)

3

Mp3 loop playback function button; (with Repeat One / Repeat ALL / 

Random / Repeat Folder mode.)

4

Play / Pause (long press this button in FM mode to receive the station)

5

Recording function button; (press this button in PLAYING mode to record) 

(Long press the Record button to switch between recording and USB playback)

Next song (long press to decrease volume)

USB function

Press the MODE button to select the USB mode, copy the MP3 file in the U disk (below 32G), and

 

it supports MP3 / WAV / WMA / AEC / FLAC format.

TF

USB

IR

Summary of Contents for SFB120
















Reviews: