8
5. OPERATION ILLUSTRATION
1
.
Connect the speakers:
①
When the 100V and 70V selector switch to
70V position, as shown below:
②
When the 100V and 70V selector switch to
100V position, as shown below:
Note:
1. Before connecting the speakers, please make sure that the equipment is powered off. In the
case of power on, may have the risk of electric shock.
2. Please
make sure there
are no
applied load to the speaker cables
.
3. During the installation of speakers, please make sure that the sum of the rated input power
of the speakers to be connected is less than rated power of equipment.
2.Connect external devices:
①
Please ensure that the equipment and all equipment will be connected are powered off.
②
Using the corresponding cable to connect this equipment and other external equipment.
3.Connect the power line and turn it on:
①
Please make sure that the
power
switch
of
equipment and its
connected equipment are
turned off (in the OFF position).
②
Turn the volume knob to the left
③
Connect the supplied power line to the AC IN interface
④
Plug the power line into
the
applicable
socket
⑤
Turn on the connected equipment (CD player
,
etc
.
), and then turn on the equipment
.
Note:
1
.
Before powering on, please check and make sure there is no problem with the cable and connection.
2
.
When you turn off the system, turn off the equipment, and then turn off the connected equipment.
70V/
100V
OUTPUT
COM COM COM
Maximum output voltage: 70V
SPK-
SPK+
70V
100V
70V/
100V
OUTPUT
COM COM COM
Maximum output voltage: 100V
SPK-
SPK+
70V
100V
