ITC DOSTEC-50, Manual

Page: 5 / 28

4 5
It is made up as follows:
Motor
Cylinder
Block
Regulator
Injection valve
1.- GENERAL DESCRIPTION
DOSTEC-50 dosing pumps are heavy duty, high precission, piston pumps for
dosing liquid products.
This series allows many injection possibilities depending on the head being
chosen. The available heads are from 330 to 1000 l/h for the piston series, and
from 207 to 870 l/h for the diaphragm series.
DOSTEC-50 dosing pumps are manufactured with materials that can resist
most chemicals products, even acids. They are designed for all sorts of
processes where it is necessary to dose a product into a hydraulic network,
such as: food, textile, chemical industry, water treatments, etc. (See materials
in Technical Features). In case there is any doubt about compatibility of
materials with the products to be used please contact ITC S.L. Technical
Service.
Dosing flow of each module is adjustable independently with no need to stop
the pump from 0% to 100% of its capacity.
Code formulation
2.- UNPACKING AND STORAGE
The original packing is prepared so that carriage and storing of the product do
not cause any damage to the product, as long as this is done far from heat
sources and in dry, ventilated spaces.
Inside packing we include:
- DOSTEC-50 dosing pump
- Handbook
3
- Oil (700cm )
Suction valve
L: 1HP 3 Ph
M : 1HP 2Ph
71 - L P 43 - P77 P P X
P : Piston
D : Diaphragm
1
2
: 7,5 mm
3 : 10 mm
4 : 15 mm
: 5 mm
P: PP - PEUHMW/PTFE
I :AISI316- AISI316/PTFE
F : PVDF - ---- / PTFE
T: PTFE - ---- / PTFE
A : PP - AISI316 / ----
P77: 77 mm Piston
P95 : 95 mm Piston
P110 : 110 mm Piston
D142: 142 mm Diaphragm
D163 : 163 mm Diaphragm
ø
ø
ø
ø
ø
INJECCION DIAMETER
MATERIAL
Cylinder - Piston/ Membrane
MOTOR
X: 1”1/4
Y: 1”1/4 NPT
CONNECTION
VALVE
Body - Ball
P: PP - Soda.
B : PP - Boro.
I : SS 316
F : PVDF - Boro.
T : PTFE - Boro.
3
4
: 120 Stroke/min.
5 : 144 Stroke/min.
: 60 Stroke/min.
FREQUENCY
HEAD
STROKE