ITC 011423, Operator'S Manual

Page: 11 / 24

11
ENGLISH
PARTS LIST
Please refer to Schematic Drawing on page 24.
No. Description No. Description
15 Scale 59 Guide bar
16 Knob 60 Spring
17 Stator 61 Guide bar sleeve
18 Bearing 62 Screw
19 Rotor 63 Depth stop turret
20 Fan baffle 64 Steel ball
21 Screw 65 Spring
22 Bearing plate 66 Adjusting screw
23 Bearing 67 Spring
24 Spring 68 Router base
25 Plastic screw 69 Plastic plate
26 Right handle 70 Phillips screw
27 Flat washer 71 Wrench
28 Spring washer 72 Straight guide
29 Screw 73 Guide rod
30 Right handle cover 74 Dust exhaust adaptor
31 Plug 75 Scale
2 Cord 6 Plastic plate
33 Cord cover 77 Screw
34 Left handle 78 Butterfly screw
35 Capacitor 79 Sleeve
36 Plate 80 Location board
37 Screw 81 Guide wheel assembly
38 Switch 82 Square nut
39 Left handle cover 83 Template guide
40 Screw 84 Phillips screw
41 Front cover 85 Nut
42 Threaded bearing cap 86 Short sliding socket
43 Torsion spring 87 Long sliding socket
44 Locking screw 88 Pan head screw
WARRANTY
ITC branded power tools, air nailers staplers and compressors are designed for use in DIY (do-it-yourself), light or
intermittent duty, semi-professional applications. They are not intended for use in professional, production, industrial or
continual use applications.
ITC makes every effort to ensure that its products meet high quality and durability standards and are warranted for two
years against manufacturers’ faults and defects for a period of two years from the date of purchase to the original owner.
ITC will REPAIR OR REPLACE (at our discretion) merchandise deemed by the company to be defective, provided that it
is has not been misused, abused, altered, or repaired by anyone other than an authorized repair centre.
Please consult the ITC catalogue or your nearest ITC distributor to determine those products that are covered by our over-
the counter warranty. Any ITC tool that fails during normal use and within the specified warranty period and qualifies for
over-the counter warranty must be returned to its point of purchase for replacement or credit. Any item not listed as over-
the-counter warranty must be shipped, prepaid freight, to an authorized repair depot accompanied by a copy of the invoice
specifying the date that the item was purchased. Returned tools that are not accompanied by a proof of purchase (Copy of
Invoice) will not be repaired or replaced under warranty.
This warranty does not extend to normal wear or consumable parts such as brad and staple gun driver blades, grinding
discs, saw blades, driver bits, electric motor brushes, worn chords, etc. It also does not apply to ITC tools used in
professional, production, industrial or continual use applications.
For a listing of the authorized repair centers please refer to the ITC catalogue.
WARRANTY