2
1.
General instructions
The product is intended for measuring the fuel level in the fuel tanks of vehicles (hereinafter referred to as the
'Vehicle') or stationary fuel storages (hereinafter referred to as the 'Object'), for converting it into analog, fre-
quency and digital signals used by an external device (monitoring system terminal).
Types of controlled fluids: gasolines, diesel fuel and other liquid petroleum products that maintain the state of
aggregation in the operating temperature range.
2.
Safety measures
Only personnel who have been trained and have valid certificates for the right to conduct this type of work are
allowed to carry out installation and commissioning.
When carrying out installation and commissioning, the safety requirements stipulated in the operational docu-
mentation of the manufacturer of the object at which work on the installation of the product will be performed
must be observed as well as the requirements of the regulatory documentation for this type of facilities.
3.
Preparing the product and object for installation and connection
3.1.
Checking the completeness of the product
1
Open the package. Check the completeness of the product according to the data sheet. If something is
missing in the package from the items listed in the product's data sheet, the manufacturer must eliminate
the inconsistencies.
Inspect the appearance of the product. There should be no visible damage on the product. In case of exter-
nal damage, the product must be replaced by the manufacturer.
3.2.
Choosing the place to install the product
Install the product in the object in such a way that the axis of the sensitive element of the product is as close as
possible to the geometric center of the object cavity. When installed in such places, the minimum dependence of
the measured fuel level on the inclination of the vehicle during the movement is ensured. Ideal and close to ideal
installation options are shown in Figs. 1÷4.
1
The operation is performed in the case when the user has none of input control service.
Summary of Contents for GS.01.00.00.000 IM
Page 3: ...3 Figure 1 Figure 2...