ITALMOTO Clodia Owner'S Manual Download Page 11

Page: 11 / 62

a trailer. Riding with a trailer or a trailer
bike or pulling another bicycle using a bi-
cycle connection system is not permitted.

Always make sure that your

ITALMOTO

e-bike is

used for the

purposes it was designed for.

If the

ITALMOTO

e-bike is used in ways for

which it was not designed, this could
result in

damage to the fitted

components. This

could then lead to

accidents and injuries.

The

ITALMOTO

e-bike is not intended for

persons with

limited physical, sensory or

mental

abilities. The e-bike is not suitable

for

children under 14

years old.

Taking the battery for your

ITALMOTO

e-bike

a passenger plane is not

permitted.

Transporting the e-bike with the

battery fit-ted on a vehicle rear-mounted
cycle rack

or roof carrier is not

permitted. Remove

the battery before transporting.
Before transporting also remove compo-
nents which are not securely bolted
on such as, e.g. the control console,

smart

phone and net pockets.

Summary of Contents for Clodia































































Search results

Summary of Contents for Clodia

Reviews:

Related manuals for Clodia

Brands by name

Popular brands

ITALMOTO Clodia, Owner'S Manual

Search results

Summary of Contents for Clodia

Reviews:

Related manuals for Clodia

Brands by name

Popular brands