background image

5

user

bASIC SAFETY RulES

When using a product with combustion 
or electrical energy, always follow basic 
safety precautions to reduce the risk of 
injury.  Read  this  manual  carefully  to 
learn its use and limitations as well as 
potential hazards associated with its use.

Do 

not 

allow 

children 

or 

unsupervised disabled persons 
access to the convection heater.

Do  not  use  this  product  in  the 
presence of an explosive gaseous 
fume.

Should you do so:
• ventilate the room by opening the doors 
and windows;
• close the fuel/gas supply cock;
• contact Technical Service or a qualified 
technician immediately.

Do not touch the convection heater when 
barefoot, or when wet.

Do  not  touch  the  grille  when  hot  air  is 
coming out of it.

Always  unplug  the  appliance  before 
cleaning any part of it.

Do  not  pull,  take  apart,  or  twist  the 
electrical cables running from the 
convection heater, even if when they are 
disconnected from the mains.

Do not place towels, dishcloths, doilies or 
any other such objects on the convection 
heater; they can cause malfunctions or 
even serious danger.

Summary of Contents for ECO SC





















Reviews: