14
user
SETTING THE ClOCK ANd
TImER
(if present)
First set the time, and then the periods during
which the heater will be on and off.
• To set the local time:
Turn the clock dial (clockwise only) until
the local time matches the indicator on the
control panel.
• To set the heater's operating times (ON):
Gently move up (model SV-SE) the segments
corresponding to the time periods in which
you wish the heater to heat the room.
• To set the heater's stop times (OFF):
Gently move down (model SV-SE) the
segments corresponding to the time periods
in which you wish the heater to stay off.
The heater can be stopped with the function
selector (set to 0) or with the master switch
on the control panel.
In the first case, the clock continues running;
in the second case the clock stops and you
must set the local time again when you turn
the appliance back on.
Note, model SV: when the appliance is
switched off by the timer, the main burner
goes out, but the pilot light stays on
Summary of Contents for ECO SC
Page 1: ...SC SV SE...
Page 7: ...7 user Gas convection heater type C sealed chamber for heating eco SC eco SV eco SE...
Page 19: ...19 user notes...
Page 20: ...3520010101 Rev 0...
