Italia Star Com Due BISONTE BTA-MD600Y, User Manual

Page: 134 / 150

Fine Tuning for Operation at High Altitude
Checking the Spark Plug
check the standard setting.
Warm up the engine.
Turn the high speed screw (H) slightly clockwise (leaner). On models with limiter caps, turn high speed
screw (H) 1/4 turn, but no further than stop.
If the setting is too lean there is a risk of engine damage due to insufficient lubrication and overhe
ating.
A slight correction of the setting may be necessary if engine power is not satisfactory when operating at
high altitude:
If engine is down on power, difficult to start or runs poorly at idle speed first check the spark plug.
Remove the spark plug - see "Starting / Stopping the Engine"
Check electrode gap (A) and readjust if necessary - see "Specifications".
Rectify the problems which have caused fouling of spark plug:
.
To much oil in fuel mix.
.
Dirty air filter.
.
Unfavorable running conditions.
Fit a new spark plug after about 100 operating hours
.!
or sooner if the electrodes are badly eroded.
To reduce the risk of arcing and fire:
1
3
2
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
Italia Star Com Due S.R.L.
134