IT Works CPL500W, User Manual

Page: 27 / 105

26
The Power LED indicators on both devices will flash evenly at 1-second interval until the operation succeeds or fails. If the
connection is successful, the Power and Data LED indicators on both devices illuminate steadily. If the connection is failed, the
Power LED indicators on both devices still illuminate steadily, but the Data LED indicators on both devices go out. In that case,
please repeat Step1 to Step4.
Joining an AVLN Network
Assume that a network exists, a new device, the ‘joiner’, wants to join the network. Any device on the existing network can
become the ‘adder’.
Step1 Press the Security pushbutton on the ‘joiner’ for at least 10 seconds. The device will reset and restart with a random
NMK.
Step2 Press the Security pushbutton on the ‘joiner’ for less than 3 seconds.
Step3 Press the Security pushbutton on any network device for less than 3 seconds, making it the ‘adder’. Please press this
pushbutton within 1 minute.
Step4 Wait for the connection to complete.
The Power LED indicators on both devices will flash at 1-second interval until the process succeeds or fails. If the connection is
successful, the Power and Data LED indicators on both devices illuminate steadily. If the connection is failed, the Power LED
indicators on both devices still illuminate steadily, but the Data LED indicators on both devices go out. In that case please repeat
Step1 to Step4.
Leaving an AVLN Network
Downloaded from www.vandenborre.be