IT Works CPL500W, User Manual

Page: 22 / 105

21
Field Description
Wireless Name (SSID)
The wireless network name (SSID) can contain up to 32 characters and can be letters,
numerals, underlines, and any combinations of them. The SSID is case-sensitive.
Network Name Status
If Visible is selected, the PLC wireless adapter broadcasts its SSID on the wireless
network.
If Invisible is selected, the PLC wireless adapter does not broadcast its SSID on the
wireless network.
Transmission Rate Set the proper transmission rate.
Transmit Power
Select the proper transmission power from the drop-down list. You can select 100%, 80%,
60%, 40%, or 20%.
User Isolation
On indicates that the computers wirelessly connecting to the same SSID cannot
communicate with each other.
Off indicates that the computers wirelessly connecting to the same SSID can
communicate with each other.
Enable WMM (Wireless QoS)
This function is not available. If this function is disabled, the wireless PLC adapter adopts
WMM to mark priority and to arrange the order of Wi-Fi network queues.
Max Clients
Beacon period indicates the frequency of the PLC wireless adapter that sends the Beacon
frame. By default, the PLC wireless adapter sends the beacon frame every other 100ms. The
range is 20~1024.
Region Select the country where you are from the drop-down list.
802.11 Mode
Select the appropriate wireless mode. The default is Mixed 802.11b/g/n .
802.11b only: The maximum rate is 11Mbps.
802.11g only: The maximum rate is 54Mbps.
802.11n only: For 20M bandwidth, the maximum rate is 130Mbps (150Mbps for short
preamble); for 40M Upper (+) or 40M Lower (-) bandwidth, the maximum rate is
270Mbps (300Mbps for short preamble).
Mixed 802.11b/g: It is compatible with 802.11b and 802.11g.
Mixed 802.11n/g: It is compatible with 802.11n and 802.11g.
Mixed 802.11b/g/n: It is compatible with 802.11b, 802.11n, and 802.11g.
Bandwidth
You can set the band width only in the 802.11 mode that is compatible with 802.11n. For
20M bandwidth, the maximum rate is 130Mbps (150Mbps for short preamble); for 40M
Upper (+) or 40M Lower (-) bandwidth, the maximum rate is 270Mbps (300Mbps for short
preamble).
Wireless Channel
Select the working channel of the wireless network. The default is Auto Scan , which
indicates that the wireless router automatically searches for the best channel among the
available channels.
After setting the parameters, click Apply to save the configuration.
Access control
Choose ADVANCED > Advanced Wireless > Access Control on the left pane or click Access Control on the Advanced Wireless page
to display the following page.
Downloaded from www.vandenborre.be