moment.
C
– The indicator light provides the status of the Active Probe as follows:
·
Permanently green - Powered On and ready
to use.
·
Blinking green - Establishing connection
with the BlueBox.
·
Blinking blue - Reprogramming SPLASH.
·
Permanently magenta - Golden image
loaded and ready to use.
D
– FNet connector, that connects the Active Probe to the iC5700 BlueBox. The FNet cable is
delivered with the Active Probe.
When powering on the system, switch the iC5700 on before powering on the target
system. When powering down the system, power off the target before powering off the
iC5700!
FBridge port is not Ethernet port!
Use only original iSYSTEM accessories for powering and connecting with the iC5700.
Consult with iSYSTEM before attempting to use any other accessory.
Target connector
The target should feature a matching part, for example, Samtec part number: ASP-137969-01
(Samtec Series ERF8, Rugged High-Speed Socket).
