Further Active Probe Settings
The iC5700 can connect to AURIX™ target devices through:
·
its installed DTM module and an appropriate DAP cable adapter (e.g. IC50163-2).
This debug system has limited maximum DAP frequency and does not support the DAPE
debug interface nor the AGBT interface. Alternatively, JTAG debug interface support is also
available through a dedicated JTAG cable adapter (e.g. IC50160).
·
Infineon DAP/DAPE Active Probe supporting the DAP and DAPE debug interface
·
Infineon AGBT Active Probe
·
Infineon USB-C Active Probe
In order to switch from the default DTM interface use to the Active Probe use, open
Hardware
menu / Options / FNet tab
:
1. Click Refresh in Hardware menu / Options / FNet / Currently connected FNodes.
2. Click Create configurations for connected FNodes. Selected device is displayed in FNode
configurations
.
Configuration is created. Look for:
·
Listed devices with Matched FNode
·
Y (for yes) under Matched config
·
List of available networks
