iSystem IC57164 User Manual Download Page 15

Page: 15 / 16

Accessories

IOM6 product line

Expand the iC5700 operation with modules from the IOM6 product line to enable parallel debugging
and testing of multiple different target systems, monitoring of network traffic (e.g. LIN/CAN/CAN FD)
and manipulation of analog and digital signals.

Ordering Code

Description

IC57031

IOM6-HUB with three extra FNet ports and an FBridge port

IC57040

CAN/LIN Add-On Module

IC57041

Analog/Digital Input/Output Add-On Module

IC57125-1

ARM HSSTP II Active Probe

IC57163

Infineon DAP/DAPE Active Probe

IC57164

Infineon AGBT Active Probe

IC57150

MPC5x/SPC5x Aurora Active Probe

Infineon AGBT Active Probe Accessories

Ordering Code

Description

IASAM22TRICOREPIN10 10-pin 1.27 mm DAP Adapter
BB-FNET-100

1.0m FNet Cable

BB-FNET-300

3.0m FNet Cable

BB-FNET-500

5.0m FNet Cable

Please refer to the iC5700 User Manual for all current iC5700 accessories.

Find more information on

www.isystem.com

or contact

[email protected]

To reach for technical support please visit

www.isystem.com/support

Summary of Contents for IC57164

















Search results

Summary of Contents for IC57164

Reviews:

Related manuals for IC57164

Brands by name

Popular brands

iSystem IC57164, User Manual

Search results

Summary of Contents for IC57164

Reviews:

Related manuals for IC57164

Brands by name

Popular brands