iSystem iC5000 CI BlueBox On-Chip, User Manual

Page: 10 / 20

F – 10/100 Ethernet Socket
G – USB 2.0 Socket
It is recommended to use the supplied USB 2.0 cable delivered with your iC5000 CI as it has
been confirmed to fulfill the maximum USB 2.0 transfer rate. Use of alternate cables must be
undertaken at your own risk. The USB 2.0 interface provides the highest possible data transfer
rate of the two available interfaces. It is
highly recommended to use the USB 2.0 when using
the trace feature due to the quantity of data to be uploaded to the PC.
Both the 10/100 Ethernet Socket and the USB 2.0 Socket can be connected to a network/PC
simultaneously. The active interface will be determined by whichever interface winIDEA
connects to first.
When powering on the system, switch the BlueBox unit on before powering on the
Target. When powering down the system, power off the Target before powering off the
BlueBox unit!
FBridge port is not Ethernet port!
Use only original iSYSTEM accessories for powering and connecting with the BlueBox
unit. Consult with iSYSTEM before attempting to use any other accessory.
Differences between iC5000 and iC5000 CI
iC5000 CI iC5000
License type Subscription Perpetual or Subscription
System price Lower Regular
Debug & Test functionalities
via winIDEA GUI
Debug & Test functionalities
via SDK APIs