SGZ805A can be bound with a ZigBee enabled Home Automation
ON/OFF
switch
Pairing operation:
1. On SGZ805A, long press the binding key for
3 seconds
. You should see the
LED flash once then release the key.
2. Likewise, do the same on the control switch to exchange binding according to the
instructions of that device.
When pairing is successful the LED indicator on SGZ805A flashes 5 times then turn solid lit,
otherwise it flashes 10 times indicating pairing unsuccessful.
Clear pairing setting
:
You may remove the pairing between the two or more devices.
Unbinding procedure is exactly the same as binding operation. When you repeat the
binding operation, the two devices will remove the binding information stored.
S
tep 2.
Device pairing (binding)
