7
Seebacher GmbH
www.seebacher.de
Phone: +49 (0) 80 41 / 77 77 6
Marktstrasse 57, 83646 Bad Tölz
Fax: +49 (0) 80 41 / 77 77 2
In the ProgramDesigner (from version 8.00.13.1002 R095) the sensor must be created as a module.
Additionally a virtual module „ISYGLT_ADR“ is required.
To set the BUS address, the desired address must be entered in the register
Parameter
.
Now the sensor to be addressed must be put into addressing mode - the red LED now flashes quickly.
Click on „Sende Parameter“ in the ProgramDesigner - the red LED on the LS-05-HF-xx turns off and the sensor now reports to the BUS.
10.3. Detection range HF sensor