6
Seebacher GmbH
www.seebacher.de
Phone: +49 (0) 80 41 / 77 77 6
Marktstrasse 57, 83646 Bad Tölz
Fax: +49 (0) 80 41 / 77 77 2
10.2. Address setting
Due to its design, the sensor does not provide space for the usual DIP switch for address setting. At this sensor, the address is set via software
parameterisation with the ISYGLT ProgramDesigner.
Display and buttons at the sensor
State
Meaning / Function
LED red
slow flashing
Sensor has no address
fast flashing
Sensor is in programming mode
Off
Sensor has a BUS address
individual
In BUS operation, the LED is freely programmable, e.g. motion active.
Button right
Activating the programming mode, actuation with a small screwdriver or plastic, e.g. small cable tie
Button left
Deactivating the programming mode
Terminal
Designation
+
Operating voltage
-
Operating voltage
A
Subnet BUS A
B
Subnet BUS B
10.1. Pin assignment
