ON/
MEAS
-08-
Select Probe tip
This vibration meter is designed to fit the different measu-
rement requirements as follows.
A. With tip probe S: It provides good response
and reproducibility over a wide range.
As the following figure.
B. With probe tip L: Suitable for narrow
object or special objects to obtain quick
response as the following at figure.
ON/
MEAS
C. With Magnetic probe: Suitable for
measurement in cases where flat
Ferric object to the stable measurement.
as the following figure.
ON/
MEAS
D. Without probe tip: In this condition, best
high- range response is achieved
(10Hz to 15kHz), but planar contact with the
measurement object is required as the
following picture.
ON/
MEAS