iStor iS12U3 Page 9 User Manual Download

Page: 9 / 98

SATA II RAID Subsystem

User Manual

Features

Supports RAID levels 0, 1, 10, 3, 5, 6, and JBOD

Supports hot spare and automatic hot rebuild.

Allows online capacity expansion within the enclosure.

Local audible event notification alarm.

Supports password protection and UPS connection.

Built-in serial port interface for remote event notification.

Dual host channels support clustering technology.

Tagged commend queuing for 256 commands, allows for overlapping data
streams.

Transparent data protection for all popular operating systems.

RAID ADG provides the highest level of data protection.

Supports multiple array enclosure per host connection.

Online RAID level migration.

RAID Management

Smart-function LCD panel.

Environmental monitoring unit.

Real-time drive activity and status indicators.

Browser-based GUI management utility.

Summary of Contents for iS12U3



































































































Search results

Summary of Contents for iS12U3

Reviews:

Related manuals for iS12U3

Brands by name

Popular brands

iStor iS12U3, User Manual

Search results

Summary of Contents for iS12U3

Reviews:

Related manuals for iS12U3

Brands by name

Popular brands