SATA II RAID Subsystem
User Manual
71
5.4.5 Identify Selected Drive
Use this option to physically locate a selected drive to prevent removing the wrong drive.
When a disk drive is selected using the
Identify Drive
function, the Status LED of the
selected disk drive will be blinking.
To identify a selected drive from the drives pool, click on the
Identify Drive
link. The
“Select The IDE Device For identification” screen appears. Tick on the IDE device from the
drives list. After completing the selection, click on the
Submit
button to identify
selected drive.
Summary of Contents for iS12U3
