Hardware Information: Rear View
D4
SATA 7-pin data connector
D5
4-pin Floppy power connector
BPX-35U3-SA Installation
Hard Drive Installation
4)
Press the eject button to eject, and pull the HDD enclosure out.
Connect the Floppy to Molex power cable. Floppy end to the
BPX-35U3-SA and Molex end to a power supply.
1) Install BPX-35U3-SA to a computer with one 3.5" drive bay available
Use the screwdriver to unscrew the back cover.
Take out the PCB.
Insert the PCB back to the HDD enclosure and secure the back cover
with screws.
Included Accessories
• Power cable, SATA cable, USB3.0 cable, screwdriver, screws
2)
3)
Insert the HDD enclosure.
4)
Connect SATA 7-pin data cable. one end to the BPX-35U3-SA and the
other end to a motherboard
2)
D4
D5
1)
3) Place HDD/SSD onto the PCB, and connect to SATA connector.
Use M3 screws to secure the HDD/SSD.
External Application with USB 3.0 Connection
Eject the HDD enclosure
1)
Connect the USB 3.0 Micro-B to Standard-A cable. One end to the
BPX-35U3-SA and the other end to a computer with an USB 2.0 or 3.0
port available.
2)
BPX-35U3-SA