T
he
reference
in
surface
TreaTmenT
www.istsurface.com
9
DC/DCM100 to 330 Dust Collector - Instruction Manual & Parts
c. If your dust collector is equipped with the automatic shacker option (part number 601429) 120 volts or
(part number 601427) 600 volts, the action will occur automatically at motor’s shut down
2. Remove dust from the dust collector on a regular basis. Before opening
the door, make sure to have a container under the trap to collect the dust.
(picture 3)
If you are equipped with the dust drum option simply open the lid with the
ring’s lever
(picture 4
) and empty dust.
3. Never wash dust bags. If you have to clean them, use compressed air only, blowing from the outside to
the inside of the bag (the opposite would clog the bag’s pores an make it unusable). Replace torn bags as
needed. For replacement parts, see diagrams and parts lists at pages 11 to 18.
IMPORTAnT : bag’s shacking should never be done while the electric motor is
running. Always wait for complete stop of electric motor to avoid bag’s tearing.
Picture 3
Picture 4
INSTALLATION (CON’D)
MAINTENANCE
MAINTENANCE (CON’D)
