IS31SE5117 EVB User Manual
Lumissil Microsystems – www.lumissil.com
11
Rev. B, 10/25/2020
3.2
Export/Import
As shown in
Error! Reference source not found.
below, "Export Register List" is used to export the register list
of IS31SE5117. By exporting the register list, we can save the parameters set by the GUI to the computer. "Import
Register List" is used to import the register list of IS31SE5117. By importing the register list, we can load the
parameter file of the previous GUI settings into the computer.
Figure 11: GUI export/import options
3.3
Write Parameters to Flash
As shown in
Error! Reference source not found.
Figure 15 below, the user can write the parameters set by the
GUI into the flash memory of the IS31SE5117 chip. After clicking the "Write Parameters to Flash Memory" on the
Menu Bar, the operation of writing parameters to Flash memory can be completed in about 4 seconds.
The embedded Flash Memory has the capability to hold saved data even if the power is turned off. When the chip
is turned on again, the parameters previously written to the flash memory will become the default values.