© 2014 ISSC Technologies Corp.
10
Step 1.
Verify JP2 is configured for USB power.
Default is using
USB
as the main power supply.
Step 2.
Verify SW1 switches are set to Application mode.
Make sure the
SW1
is under the
Application
Mode. 1:
OFF
, 2:
OFF
, 3:
OFF
Step 3.
Verify SW5 button is in the ON (pushed down).
Step 4.
Using the micro USB cable, connect the BM77EVB to host PC USB port to power up EVB.
The blue connection LED1 indicates connection state as follows:
Stand-by
State- the
LED1
of EVB will blink
once
at a time. (Blue)
Pairing
,
Connected
State- the
LED01
will blink
twice
at a time.
Step 5. Verify Virtual COM port is created
If a virtual COM is not observed in the Device Manager port list, it may be necessary to install Microchip
MCP2200 driver. (Search Internet by typing keyword”
Microchip MCP2200 Driver”)
Step 6.
Run the
BT
Chat Tool.exe
on your PC and make sure the COM Port is connected.
