Connecting via Bluetooth® (first time
set-up)
1.
Press and hold the power/phone button for at least 4
seconds to turn the headset on. You will hear a voice say
“Power on”, then continue to hold the button until you
hear “Ready for pairing” and the LED power indicator will
rapidly flash blue and red.
NOTE:
During the first time set-up, you must hold the
power/phone button down until you hear a voice say
“Power on” then followed by “Ready for pairing” in order
to sync your device to Bluetooth. After the initial pairing,
you can let go of the power/phone button after you hear
“Power on”.
2.
Open the settings on your Bluetooth device. (Bluetooth
must be enabled)
3.
Select “BT-200” from the list of Bluetooth devices.
4.
Once paired, you will hear a beep then a voice say
“Device connected”. The LED power indicator light will
flash blue slowly.
5.
To turn off the BT-200, press and hold the power/-
phone button for at least 5 seconds. You will hear a voice
say “Power off” before the headset turns off.
NOTES:
• Upon use of your BT-200 the volume must be adjusted
to your desired level, as the volume level has been
pre-set to the maximum.
• Your device will automatically find and pair with the
BT-200 after the initial pairing. If your device does not
automatically pair, you will hear a voice say “Pairing not
completed”. Turn off the headset and repeat steps 1-4.
Summary of Contents for BT-200
Page 1: ...BT 200 User guide Guide de l utilisateur Guía de usuario www isound com ...
Page 2: ......
Page 35: ......
Page 36: ...www isound com WXY 03 071318 ...
