ISOUND BT-200, User Manual

Page: 4 / 36

BT-200; press and hold for at least 5 seconds to power off
the BT-200.
• When playing music, press and release to pause music;
press and release again to play music.
• When receiving an incoming call, press and release to
answer; press and release again to end the call; press and
hold for 2 seconds then release to reject the call.
• Press twice quickly to call last number dialed.
• When a user is connected and the BT-200 is off, press
and hold for at least 5 seconds to unpair from Bluetooth
(allow another user to connect).
• Press and hold for at least 4 seconds to activate your
phones personal assistant.
NOTES:
• During the first time set-up, you must hold the
power/phone button down until you hear a voice say
“Power on”, then followed by “Ready for pairing” in order
to sync your device to Bluetooth. After the initial pairing,
you can let go of the power/phone button after you hear a
voice say “Power on”.
• When playing music and a call comes in, the music will
pause and you will hear a ringtone. The music will resume
when the call is ended. Device’s ringtone may vary.
• If you reject a phone call, you will hear a voice say
“Phone call rejected” and your music will resume playing.
If the music does not begin, press and release the
power/phone button again to resume the current track.
• The power/phone button functions may vary per device.
Volume up/track forward button
• Press and release to raise the volume.
• Press and hold to go to the next track.