Isotra VERANDA HRV80-ZIP-2P, Measurement And Assembly Manual

Page: 7 / 41

MEASUREMENT AND ASSEMBLY MANUAL
Document validity: 12.8.2019
.05.2019
7
Measurement and assembly instructions
1. General information
To a great extent, the HRV80-ZIP-2P veranda screen allows regulating the sunlight penetration into a room and thus avoids
unpleasant high amount of light and heat. The fabric is protected when rolled in the box which is closed by bottom section in the fully
retracted position. The box is attached to a wall behind the screen using wall and fixing brackets.
This system is designed to easily overcome any small tolerances of roof construction. The whole system is made from corrosion-
resistant materials.
Veranda HRV80-ZIP-2P is equipped with a zipper system that ensures the fabric stays properly taut in every position of the bottom
section and avoids fabric slipping out from the guide rails. The individual parts of the fabric are always fitted with a zipper on both the
left and right side, while the thicker part locks with the plastic zipper section inserted in an aluminium guide rail.
The HRV80-ZIP-2P system consists of the following parts:
• Box with an easily removable, motor-driven winding cylinder,
• Fabric with a zipper, wound in the box,
• Guide rails for easy connection of the zipper section,
• Bottom section with a spring and cords that keep the fabric taut, plus water draining,
• Stands on which the sections rest,
• Frontal cross bar that ensures horizontal connection of the stands,
• Zipper guiding and tightening system.
2. Installation options
This type of sun screen can only be installed to a wall.
The rear side of the box is equipped with supporting brackets that allow attaching the box to already installed brackets.
Following the box installation, the stands (with the cross bar) are to be placed to the front part and connected to the sun screen using
articulated joints. The stands are anchored in or on the substrate.
If water-proof fabric is used and the minimum angle is observed, water will drain over the front rail.