MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 8. 2016
8
2.5.9. Slats - adjustment
A –
Using the mounting cable move the blind up and down.
B – Moving the slats up push the upper limit button on the engine.
C – Both slats are in opened position. Check their parallelism.
2.5.10. Slats - adjustment
A –
When achieving the required upper end limit (usually height of lintel or
front cover) stop the slats movement.
B – Movement up is still possible for eventual setting.
C – By moving the slats downwards the upper end limit is saved.
ATTENTION!
Do not change the lower end limit! This is factory default setting.
2.5.11. Engine connection
A –
Connect power supply with the engine.
B – Use suitable plug according to engine control type.
C – Ensure that the cable does not decrease blind functionality.
2.5.12. Slats
A –
Insert rest of slats and secure them with stainless clips.
B – Seal rubber on the slats is facing always the exterior view.
