MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 6. 2017
11
Step 2: Sliding the guide rails over the console
pivots on the bottom of the box
Place the screen box on the cardboard packaging
(take care not to damage the paint finish).
Next slide the pre-drilled guide rails onto the console
pivots on each of the side consoles.
Make sure the sliding blocks of the bottom slat enter
the guide rail slots correctly and the zipper on the
fabric slides into the U-shaped part of the plastic guide
profile.
Step 3: Positioning the box and the guide rails
Now lift the screen box with the guide rails. Do this
with at least two persons. Support the box and the
guide rails at the same time.
Place the complete screen assembly in or against the
window opening.
For motorised operation, feed the motor cable inside
through the previously drilled lead-through.
Attention! Be careful not to break off the pivots of the box by moving the guide rails too much forwards,
backwards or sideways.
fig. 17
fig. 19
fig. 18
