MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 10. 2022
5
2.1.7. Plastic parts with spring
Insert plastic profile with spring of guides in the top profile KIT.
Gently push the plastic part to the upper profile and tighten the
screws. Plastic profile needs to elongate.
Using of this component is recommended for windows that are not
at right angles. If the windows are at right angles, it is not
necessary to use it.
2.1.8. Guard insert
Insert the guard to the bottom frame KIT for better guidance KIT in bottom profile.
2.1.9. Sliding test
