4 Changing the Door Panel
To suit various boat interiors, the doors of all
Cruise refrigerators are available as accesso-
ries with panels in white, black, mahogany,
teak, and cherry. They may also be covered in
other materials of choice.
1. To replace the panel, remove the strip on
the lower edge of the door. (Fig. 1)
2. Remove the latch.
3. Slide the new panel into place over original
panel.
4. Replace the latch and the plastic strip at the
lower edge of the door.
5 Re-hanging the Door
All Cruise refrigerators doors are hung with the
hinges on the right hand side of the box. To re-
hang the door with the hinges on the left follow
these steps (Fig. 2 & 3):
1. Make sure the door is empty.
2. Remove the bottom hinge bracket.
3. Remove the door.
4. Unscrew top hinge pin.
5. Screw top hinge pin on left hand side.
6. Unscrew the door latch and reattach on the
right-hand side of the door.
7. Move the bottom hinge pin bracket to the
left hand side of the refrigerator box and reat-
tach.
8. Check the hanging of the door to make sure
it is latching and closing properly.
Fig. 1
Fig. 2
Fig. 3
