Page 33 of 49
TTI-22 Iss.04– 11/15
R0, R.01
Calibration parameters: Resistance value at "0" or "0.01" °C, A, B, C
coefficients of the used formulas
C[1], ... C[5]
2 Delete Calibr.
For deleting sensor parameters.
3 Select Sensor#1
For assigning sensor parameters to a sensor input (CH1 or CH2).
4 Select Sensor#2
4 RS232 Config.
Interface parameters of RS232.
5 Ethernet Config.
Parameters for the LAN interface.
6 Units & Backlight
1 Units: °C/°F/K
For choosing degrees Celsius (°C), Kelvin (K) or degrees
Fahrenheit (°F) as temperature display unit.
2 Backlight: OFF/ON In this menu you can set the backlight to be automatically activated whenever
TTI-22 is switched on. During operation you can use the "Lamp" key to
activate or deactivate the backlight at will.
3 Contrast
For setting the contrast (20 ... 41).
