©
Page 38 of 97
Issue: 1.04
3.7.8 Set Date and Time
Press
Set Date and Time
to change the date and/or time. This opens a window to
allow you to enter the current date and time and to select the date format
(dd/mm/yyyy or mm/dd/yyyy):
Press the ellipses buttons by each box to open a Numeric keypad window and
enter the required value.
Press
OK
to save the changes and close the window. Press
Cancel
to close the
window without making any changes.
3.7.9 Backup Data
Press
Backup Data
to transfer data that has been saved to the internal memory
(see section 3.4 or 3.5) to an external USB Flash Drive. You need to plug a USB
Flash Drive into the front of the microK in order to use this facility. With some
Flash Drives, it can take up to 15 seconds for these to enumerate and therefore be
recognised by the Windows CE operating system, you therefore need to wait for
15s after plugging in the USB Flash Drive before attempting to transfer the data
(otherwise a “No external drive present” warning will appear).
If a file with the same name is already present on the USB flash drive, you will
be asked whether you wish to over-write it. To proceed, you will need to enter
the password.
