M970-07/04
PAGE 3
1.Warranty
This instrument has been manufactured and tested in accordance with the manufacturer’s
specification and quality control procedures. It was inspected & tested to safety standards
for electrical insulation, earth impedance and is fully compliant with electrical safety class
1, under IEC 1010-1.
This instrument is guaranteed for 12 months against electrical and mechanical breakdown
caused through defective materials or workmanship providing correct operation and safety
procedures have been used. In addition correct electrical and mechanical installation has
been performed to avoid personal injury or fire from high temperature operation (100 to
1200deg.C.) using recommended health and safety features (refer to Section 5).
Any mechanical or electrical failure caused from miss-use or by not using recommended
safety features will not be covered.
In the event of failure covered by this guarantee, the instrument must be returned to the
supplier for examination and will be repaired or replaced at our discretion and returned at
our cost.
