ISON IS-DG102-F, Quick Installation Quide, Page: 4 / 7

4
Dip switch function
Power – PW 1
Fiber port Link/Active
ON --fiber is detected.
Flashing -- data is transmitting /
receiving
Green –
ON—1000M link is detected
Flashing – TX data is
transmitting / receiving
LED indicator
This unit is equipped with 4 pin dip-switch located on the front panel. Adjusting the dip-switch setting will
change the default function of this unit. All the dip-switch settings are set to manufacturer default as OFF
Table shown below is the features of these dip-switch function. You may change the dip-switch setting to your
desired environment.
Default OFF to enable 1000M SFP
speed
Default OFF to enable SFP Auto-
negotiation mode
Default OFF to enable Switch
Mode.
Default OFF to disable LFP
function
Power – PW 2
Amber –
ON—100M link is detected
Flashing – TX data is
transmitting / receiving