iSolution Xperior 300SZ Spot, User Manual

Page: 4 / 40

XP-300 SZ
3-
during its operation, and allow about 15 minutes for cooling the unit down before
replacing bulb or maintenance as it could be very hot.
y
Avoid any inflammable liquids, water or metal objects entering the unit. Once it
happens, cut off the mains power immediately.
y
Do not operate in dirty or dusty environment, do clean fixtures regularly.
y
Do not touch any wire during operation as there might be a hazard of electric shock.
y
Avoid power wires together twist other cables.
y
The minimum distance between light output and the illuminated surface must be more
than 2.5 meters.
y
Disconnect mains power before fuse/lamp replacement or servicing.
y
Replace fuse/lamp only with the same type.
y
In the event of serious operating problem, stop using the unit immediately.
y
Never turn on and off the unit time after time.
y
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
damaged.
y
Do not open the unit as there are no user serviceable parts inside.
y
Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead
to damage or malfunction. Please contact the nearest authorized technical assistance
center if needed.
y
Disconnect the mains power if the fixture is has not been used for a long time.
y
Do use the original packing materials before transporting it again.
Caution
y
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
y
Hot lamp explosion hazard. Do not open the unit within 15 minutes after switching off.
y
Do replace the bulb once it is damaged, deformed or life-expired.
y
Do not look directly at the light while the bulb is on.
y
Never touch bulb with bare fingers, as it is very hot after using.
y
Do not start on the unit without bulb enclosure or when housing is damaged.
Product Items
y
User manual
y
2 x Omega clamps