iSolution Xperior 300SZ Spot, User Manual

Page: 3 / 40

XP-300 SZ
2-
1. Safety Instruction
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty.
The dealer will not accept liability for any resulting defects or problems .
y
Unpack and check carefully that there is no transportation damage before using the
unit.
y
The unit is for indoor use only. Use only in a dry location.
y
Do install and operate by qualified operator.
y
Do not allow children to operate the fixture.
y
Use safety chain when fixing the unit. Handle the unit by carrying its base instead of
head only.
y
The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces.
y
Be sure that no ventilation slots are blocked, otherwise the unit will be overheated.
y
Before operating, ensure that the voltage and frequency of power supply match the
power requirements of the unit.
y
It’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
y
Maximum ambient temperature TA: 40 . Don’t operate it wh
℃
en the temperature is
higher.
y
Don’t connect the device to any dimmer pack.
y
During initial start-up some smoke or smell may arise. This is a normal process and
does not necessarily mean that the device is defective, and it will decrease gradually
within 15 minutes.
y
Make sure there are no flammable materials close to the unit while operating to avoid
fire hazard.
y
Examine the power wires carefully, replace them immediately if there is any damage.
y
Unit’s surface temperature may reach up to 85 . Don’t touch the housing bare
℃
-handed
Please read carefully the instruction manual, which includes
important information about the installation, usage and maintenance.