10C
the functions without any change press the
MENU
button again.
Show Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(show 1)
or
(show 2) or
(show 3) or
(show 4) mode. Once the mode has
been selected, press the
ENTER
button to setup or automatically return to the main
functions without any change after 8 seconds. To go back to the functions without any
change press the
MENU
button again.
Show 1 mode - Fixture is placed on the floor. Tilt movement angle 210°.
Show 2 mode - Fixture is fixed under ceiling. Tilt movement angle 90°.
Show 3 mode - Fixture is placed on the speaker, The spot is always projecting
to the audience’s direction; i.e in front of the stage. Pan movement angle ( left to
right to left ): 160°. Tilt movement angle: 90° ( 60° above horizon; 30° below horizon).
Show 4 mode - Fixture is fixed under ceiling. The spot is mainly projecting in front of
the stage. Pan movement angle ( left to right to left ) :160°. Tilt movement angle:
90° ( vertically, front 75°; back 15° ) .
Slave Mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(normal)
or
(2 light show) mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the
MENU
button again.
Blackout Mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(yes
blackout) or
(no blackout) mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main functions without any change
after 8 seconds. To go back to the functions without any change press the
MENU
button
11C
again.
Pan Inversion
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(normal)
or
(pan inversion) mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the
MENU
button again.
Tilt Inversion
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(normal)
or
(tilt inversion) mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the
MENU
button again.
Led Display
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(Led on) or
(Led off) mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the
MENU
button again.
Display Inversion
It is good for you to install the unit on the floor or under ceiling. Press the
MENU
button up to
when the
is blinking on the display. Use the
ENTER
button to change to the mode
(display inversion), It will automatically store after 8 seconds. Or press the
ENTER
button again return to the mode
(display normal). To go back to the functions press
the
MENU
button.
Display normal mode for the fixture putting on the floor.
Display inversion mode for the fixture fixing under ceiling.
Gobo1 focus Adjust
Press the
MENU
button up to when the
is blinking on the display. Pressing
ENTER
