ISOIL SBM 150, Operator'S Manual, Page: 8 / 35

Page 4 ISOIL IMPIANTI S.p.A.
MA/027/00/EN/07 All rights reserved. Reproduction of this manual is forbidden.
2.2 Meter operation

The meter must be operated exclusively by the personnel trained and authorised to its
operation

The meter must not be operated in presence of foreign, unauthorised or not adequately
trained personnel

The meter must be used only for the purposes it was made for; the manufacturer is not
responsible for any damage resulting from failure to comply with the conditions of use

The meter must be operated only within the technical limits described in the operator’s
manual; the manufacturer is not responsible for any damage resulting from failure to
comply with the operational limits
2.3 Instructions for the operator

The operator must adhere to safety and accident-prevention standards currently in
force in the country where the device is installed

The operator must not, by his own initiative, carry out any operation that is outside his
competence

The operator must carefully comply with hazard and/or prohibition instructions contained
in this manual

Do not use petrol, solvents or other flammable substances to clean parts. Use only
approved commercial solvents that are non-flammable and non-toxic
2.4 Servicing instructions

Never carry out any maintenance, servicing or regulation before having closed the root
valve, discharged the pressure from the system and disconnected the power supply to
any electrical device (if present), unless explicitly stated otherwise.

Read carefully the rating plates on the individual equipment

All maintenance operations, either ordinary or extraordinary, must be done by
authorised and trained personnel

The maintenance operator must wear clothes adequate to the working environment
and to the situation; in particular, loose or voluminous clothes, chains, bracelets, rings,
earrings or anything that might get caught in the mechanical parts of the system should
be avoided

The maintenance operator must wear adequate protective devices in accordance with
safety and accident-prevention regulations

In explosive environments use only antisparking equipment

If the meter is connected to any electric or electronic equipment, disconnect all of them
from the power supply before doing any servicing or regulation operation, unless
explicitly stated otherwise in the manual