ISOIL SBM 150, Operator'S Manual, Page: 7 / 35

ISOIL IMPIANTI S.p.A. Page 3
All rights reserved. Reproduction of this manual is forbidden. MA/027/00/EN/07
CAUTION
All parts under pressure must be released before disassembling the
meter or its accessories for adjustment, inspection, servicing or
substitution of its components.
Also make sure that all electric or electronic part, if present, are
disconnected from its power supply.
2 General safety principles
This operator’s manual contains basic safety instructions that must be followed during
system installation, operation and maintenance. Failure to comply with these instructions
may result in personal injury and can lead to personal, industrial or environmental accidents.
Some examples of possible hazards caused by non-compliance with these instructions are:

Failure of the system and/or some components

Hazards to people caused by the exposition to electrical, mechanical or chemical
influences

Pollution of the environment through the leaking of hazardous substances
Therefore, follow the safety instructions described in this manual; in case of uncertainties,
please contact the manufacturer.
2.1 General instructions

Read carefully the operator’s manual

Make sure that all the personnel assigned to the installation, operation and
maintenance is properly trained

Make sure that the contents of the operator’s manual are completely understood by all
personnel assigned to the operations on the system

Inspect parts under pressure in compliance with national regulations before the initial
operation of the system

Make sure that the operator’s manual is readily available to personnel on site

Follow national safety regulation in force in the location of the plant

Make sure that the system operates in compliance with the relevant operational limits

All pressure parts must be inspected and serviced in accordance with national laws in
force