Iso-Tech ICM A7, Instruction Manual

Page: 5 / 16

Refer to figure 1 and the following numbered steps to familiarize yourself with the meter’s front panel controls and
connectors.
1. Digital Display — The liquid crystal display (LCD) is a 3 1/2 digit display (maximum reading of 1999), with
autopolarity and decimal point indicators.
2. Measurement Function Dial — Rotate the function dial to select V
% , V ' ,
Ω□
and A % function.
3. Display Hold — To hold the reading on the display, press and release
HOLD
.
To exit the display hold mode, press and release
HOLD
again.
4. Sensor Zone — Place conductor anywhere within the sensor zone (shades area shown as Figure 2).