29
Audio recording
Menu with which audio recording is activated or deactivated. Access the function
with OK, select ON to activate or OFF to disable the audio recording.
Confirm with OK.
Shot Lag
Setting the delay between one PIR survey and the next.
It is used to limit the excessive sending of alarm notifications.
Available options: programmable from 5 sec to 10 minutes.
Select an option with
and confirm with OK.
Sensitivity Motion
Setting the detection sensitivity of the PIR sensor. Available options: High /
Medium / Low;
Select an option with
and confirm with OK.
A high sensitivity level facilitates the detection of smaller moving subjects. It uses
a greater sensing distance and the sensor distinguishes the difference between
the heat of a body and the ambient temperature more. In environments
characterized by a high temperature, the heat of the subjects' bodies and the
ambient temperature are difficult to discriminate, in which case it is advisable to
use the High setting.
Target recording Time
The function serves to make the camera work, only for a period of time set by
the user.
Select ON and confirm with OK.
Set a time (hours / minutes) of activation, on the Start / Start parameter.
Set a deactivation time (hours / minutes) on the Stop / Finish parameter.
Confirm with OK.
Time Lapse
Function with which continuous recording is started for a fixed period.
During this time, the PIR sensor detection is not active.
Select ON and activate the function with OK.
