UV[YLJVUULJ[`V\YWOVUL[VH./aUL[^VYRHUKYL[Y`[OL
setup process. The iCamera KEEP does not support and cannot
JVUULJ[[V./a^PYLSLZZUL[^VYRZ
2. Ensure your phone is successfully connected to your WiFi network.
3. Ensure the USB cable is detected. If not, please replug the cable or
try another cable.
4. Ensure “Allow” on your iOS device or “Share” on Android is tapped
when asked to share your phone’s WiFi settings.
<UHISL[VYLJLP]LW\ZOUV[PÄJH[PVUZ
,UZ\YLW\ZOUV[PÄJH[PVUZHYLLUHISLKPUP6:Z`Z[LTZL[[PUNZMVY[OL
iSmartAlarm app. On your iOS home screen, go to
Settings
>
5V[PÄJH[PVUZ
>
iSmartAlarm
> turn on
(SSV^5V[PÄJH[PVUZ
,
Sounds
,
Badge App Icon
, and
Show
on
Lock Screen
.
2. Ensure Safety Monitor is turned on. Launch the iSmartAlarm app,
go to
More
>
5V[PÄJH[PVUZ
> turn on
Safety Monitor
.
3. Ensure device is not on a low battery. Ensure the device’s LED is
UV[ÅHZOPUNL]LY`ZLJVUKZ0MZVWSLHZLYLWSHJL[OLIH[[LY`
Refer to Battery Replacements.
Device status is not updating
1. Ensure device is not on a low battery. Ensure the device’s LED is
UV[ÅHZOPUNL]LY`ZLJVUKZ0MZVWSLHZLYLWSHJL[OLIH[[LY`
Refer to Battery Replacements.
2. Ensure the device has been added to the CubeOne. In the
iSmartAlarm app, go to
More
>
Device Settings
. Ensure the
device appears in the list below the CubeOne. If not,
3. Re-insert battery for the device after taking it our for 10 seconds.
4. Tap
Add
in the upper-right corner.
