iSMA-B-AAC20 DALI manual
Page 16 / 19
(when Switch slot is in true mode for the time below parameter defined in Long Press
slot), recall On / Off command to DALI device/devices. The long press is for increasing
or decreasing the lighting level. Current lighting level is stored in the device in scene
number defined in slot Scene No For Last Level (in default scene no 15). The short press
On command will recall lighting lever stored in this scene. The component does not
check the actions it has performed recently, it only performs actions determined on the
basis of triggering the corresponding inputs, therefore it is suitable for connection with
other components affecting the same ballast (whether by Address Type Single or Group
or All).
The component has the following actions:
•
Send Short Press On – This action will send On command and to DALI
device/devices
•
Send Short Press Off – This action will send Off command and to DALI
device/devices
Figure 12 - iSMA DALI On Off Dimming 2 Switch
The component has the following slots:
•
Status – Component current status,
•
Description – User description up to 32 characters,
•
Address – Short DALI device address or DALI group address,
•
Address Type – You can manage single device, group or all DALI devices,
•
Switch On– Component input with trigger DALI On or Light level Increase
command sending,
