iSMA-B-AAC20 DALI manual
Page 15 / 19
action based on the actions previously performed on it, therefore it is not suitable for
connection with other components affecting the same ballast (whether by Address
Type Single or Group or All). Each action performed on a ballast by another component
will cause the action to un-synchronize in DALI On Off Dimming 1 Switch.
The component has the following actions:
•
Send Short Press – This action will toggle between On and Off command and
send it to DALI device/devices
Figure 11 – iSMA DALI On Off Dimming 1 Switch
The component has the following slots:
•
Status – Component current status,
•
Description – User description up to 32 characters,
•
Address – Short DALI device address or DALI group address,
•
Address Type – You can manage single device, group or all DALI devices,
•
Switch – Component input with will trigger DALI command sending,
•
Long Press – Time parameter which will define time for long press function,
(In default 500ms)
•
Scene No For Last Level – Scene number which will store last level value (in
default scene no 15)
5.4
DALI On Off Dimming 2 Switch
This component has the built-in DALI command which allows to switch On and Off or
to change DALI device/devices lighting level. This component was designed to work
with double switch (one button for switch on and dimm up, second for switch off and
dimm down). The switch is working in two modes short and long press. The short press
