iSMA CONTROLLI SfAR-S-8AI2DO, User Manual

Page: 21 / 26

SfAR-S-8AI2DO User Manual
www.ismacontrolli.com DMP273en | 3rd Issue rev. 2 | 05/2022 page 21 of 26
10 Module Registers
10.1 Registered Access
Modbus
Address
Decimal
Address
Hex
Address
Register Name Access Description
30001 0 0x00 Version/Type Read Version and type of the
device
30002 1 0x01 Switches Read Switches state
40003 2 0x02 Baud Rate Read/write RS485 baud rate
40004 3 0x03 Stop Bits & Data Bits Read/write No. of stop bits & data bits
40005 4 0x04 Parity Read/write Parity bit
40006 5 0x05 Response Delay Read/write Response delay in ms
40007 6 0x06 Modbus Mode Read/write Modbus mode (ASCII or
RTU)
40010 9 0x09 Analog Filtering Read/write Analog filtering
configuration
40033 32 0x20 Received Packets LSR
(Least Significant
Register)
Read/write No. of received packets
40034 33 0x21 Received Packets MSR
(Most Significant
Register)
Read/write
40035 34 0x22 Incorrect Packets LSR Read/write No. of received packets
with error
40036 35 0x23 Incorrect Packets MSR Read/write
40037 36 0x24 Sent Packets LSR Read/write No. of sent packets
40038 37 0x25 Sent Packets MSR Read/write
30051 50 0x32 Inputs Read Connected inputs
Bit in high state
→
signal is
connected
40052 51 0x33 Outputs Read/write Alarms state
bit 9 and 10 alarm outputs
30053 52 0x34 Analog 1 Read Value of Analog Input
in mV for voltage inputs
in μA for current inputs
30054 53 0x35 Analog 2 Read
30055 54 0x36 Analog 3 Read