User Reference Manual - DuraMON
PN: 05192-075 Rev B Page 29
Troubleshooting
21
Problem
Cause
Solutions
No picture on display
Backlight level set to minimum
Increase backlight
No picture on display
Monitor turned off
Turn on the monitor
No picture on display
No input signal present
Apply signal
No picture on display
No power cord connected
Apply power
Buttons on front doesn’t work
Unit in ECDIS mode
Press Menu + Enter to unlock
the monitor
No picture on display
No power cord connected
Apply power
Buttons on front doesn’t work
Keypad defect
Please do not try to open the
unit. Send it to ISIC A/S for
repair.
The unit will not turn on.
Unknown
Please do not try to open the
unit. Send it to ISIC A/S for
repair.
Servicing the unit
22
In case that the unit still fails after following the troubleshooting send the unit to ISIC for repair. There
are no user serviceable parts inside and to ensure ECDIS compliance the monitor has to be
recalibrated at ISIC.
Terms, Acronyms and abbreviations
23
Communication protocol:
Use a serial link to control various settings in the monitor
DVI-D:
Digital Visual Interface
ECDIS:
Electronic Chart Display and Information System
GtG:
Grey to Grey
IP20:
International Protection Rating (protected against objects with
a size larger than 12.5mm)
IP65:
International Protection Rating (dust tight and protected
against water jets)
OSD:
On Screen Display
VGA:
DP:
HDMI:
Video Graphics Array
Display Port
High-Definition Multimedia Interface
