English
33
No pressure/not enough pressure in the device
▪
Only use original iSi cream chargers.
▪
Do not reuse empty chargers; empty chargers must be disposed of immediately.
▪
Refer to „Charging“ (page 24) for the required number of chargers.
▪
Only operate the device when it is standing upright, otherwise pressure will be lost.
Riser tube not inserted
▪
“Release pressure” (page 32). Put the device back into operation (see „Charging“ page 24).
►
The content dispensed is too runny
The device has been overfilled
▪
“Release pressure” (page 32). Pour out the excess content. The device is now ready for use again.
▪
Refer to “Filling” for the maximum filling amount (page 24).
The device was not shaken enough or was not shaken at all
▪
Follow the shaking instructions table under “Charging” (page 24).
Content is not cold enough
▪
After the iSi Thermo XPress Whip is filled and ready to be used, chill it in the fridge for at least
12 hours.
Heavy cream doesn’t contain enough fat content
▪
Cream must have a fat content between 32-36%. Minimum fat content required is 30%.
Not enough chargers or incompatible chargers have been used
▪
Refer to “Charging” (page 24) for the required number of chargers.
▪
Only use original iSi cream chargers.